JET Thermal Products has broadly contributed to fusion literature on such issues as quality-control in calorimetric analyses, proton transfer reactions at electrodes during fuel loading, and phonon-material interactions, and other forms of R&D.   Current research investigations include breakeven studies, nuclear transmutation of radioactive waste, and the more efficient integration of power generating systems.
 
 

Catastrophic Desorption	Phonons, Phusons
Isotope Loading	Quality Control and Assurance
Nuclear Selection Theory	Quantum Electronics
Optimal Operating Point Behavior	Research and Developments

Swartz. M., G. Verner, "Excess Heat from Low Electrical Conductivity Heavy Water Spiral-Wound Pd/D2O/Pt and Pd/D2O-PdCl2/Pt Devices", ICCF-10 (Camb. MA), Proceedings of ICCF-10,  (2003).

Swartz. M., "Photoinduced Excess Heat from Laser-Irradiated Electrically-Polarized Palladium Cathodes in D2O", ICCF-10 (Camb. MA), Proceedings of ICCF-10,  (2003).

Swartz. M., "Can a Pd/D2O/Pt Device be Made Portable to Demonstrate the Optimal Operating Point?", ICCF-10 (Camb. MA), Proceedings of ICCF-10,  (2003). 

Swartz. M., "The Impact of Heavy Water (D2O) on Nickel-Light Water Cold Fusion Systems", Proceedings of the 9th International Conference on Cold Fusion (Condensed Matter Nuclear Science), Beijing, China, Xing Z. Li, pages 335-342. May (2002).

Swartz. M., "Control of Low Energy Nuclear Systems through Loading and Optimal Operating Points", ANS/ 2000 International Winter Meeting, Nov. 12-17, 2000, Washington, D.C. (2000)

Swartz. M., "Generality of Optimal Operating Point Behavior in Low Energy Nuclear Systems", Journal of New Energy, 4, 2, 218-228 (1999) 

Swartz. M., G. Verner, A. Frank, H. Fox "Importance of Non-dimensional Numbers and Optimal Operating Points in Cold Fusion", Journal of New Energy, 4, 2, 215-217 (1999) 

Swartz, M, "Optimal Operating Point  Characteristics of Nickel Light Water Experiments", Proceedings of ICCF-7 (1998) 

Swartz, M, "Improved Electrolytic Reactor PerformanceUsing p-Notch System Operation and Gold Anodes, Transactions of the American Nuclear Association, Nashville, Tenn Meeting, (ISSN:0003-018X publisher LaGrange, Ill) 78, 84-85 (1998) 

Swartz. M., "Patterns of Failure in Cold Fusion Experiments", Proceedings of the 33RD Intersociety Engineering Conference on Energy Conversion, IECEC-98-I229, Colorado Springs, CO, August 2-6, (1998) 

Swartz. M., "Consistency of the Biphasic Nature of Excess Enthalpy in Solid State Anomalous Phenomena with the Quasi-1-Dimensional Model of Isotope Loading into a Material", Fusion Technology, 31, 63-74 (1997) 

Swartz. M., "Biphasic Behavior in Thermal Electrolytic Generators Using Nickel Cathodes", IECEC 1997 Proceedings, paper #97009 (1997) 

Swartz. M., "Codeposition Of Palladium And Deuterium", Fusion Technology, 32, 126-130 (1997) 

Swartz, M., "Isotopic Fuel Loading Coupled To Reactions At An Electrode", Fusion Technology, 26, 4T, 74-77  (1994) 

Swartz. M.,  "Generalized Isotopic Fuel Loading Equations"  "Cold Fusion Source Book", International Symposium On Cold Fusion And Advanced Energy Systems". Ed. Hal Fox, Minsk, Belarus  (1994) 

Swartz, M., "Quasi-One-Dimensional Model of Electrochemical Loading of Isotopic Fuel into a Metal", Fusion Technology, 22, 2, 296-300 (1992) 
 
 

Swartz. M., "Dances with Protons - Ferroelectric Inscriptions in Water/Ice Relevant to Cold Fusion and Some Energy Systems", Infinite Energy, 44, (2002).

Swartz. M., "The Minimal Photon Energy for Reactions requiring pi- Mesons", Journal of New Energy, 6, 1, 151-152, (2001).

Swartz. M., P.L.Hagelstein, G. Verner, K. Wright, "Transient Vacancy Phase States in Palladium following high dose rate Electron Beam Irradiation", Journal of New Energy, (2003).

Swartz, M, "Review of ICCF-7", Fusion Technology, (2000) 

Swartz, M, G. Verner,  "Bremsstrahlung in Hot and Cold Fusion", J New Energy, 3, 4, 90-101 (1999) 

Swartz, M., "Hydrogen Redistribution By Catastrophic Desorption In Select Transition Metals", Journal of New Energy, 1, 4,  26-33  (1997) 

Swartz, M., "Phusons in Nuclear Reactions in Solids", Fusion Technology, 31, 228-236 (March 1997). 

Swartz, M., "Possible Deuterium Production From Light Water Excess Enthalpy Experiments using Nickel Cathodes", Journal of New Energy, 3, 68-80 (1996) 

Swartz. M., "Catastrophic Active Medium Hypothesis of Cold Fusion" Vol. 4. "Proceedings: "Fourth International Conference on Cold Fusion" sponsored by EPRI and the Office of Naval Research (1994) 
 
 

Swartz. M., "A Brief Analysis Regarding Break-even for Cold Fusion and Overunity Energy Systems - The Case for Science Before Attempting Break-even", Infinite Energy, 41,  66-68, (2002).

Swartz. M., "Patterns of Success in Research Involving Low-Energy Nuclear Reactions", Infinite Energy, 31, 46-48, (2000).

Swartz, M., "Time Course of Thermal Stratification and Its Relevance to Flow Calorimeters", Journal of New Energy, 4, 4, 120-125, (2000).

Science and Engineering of Hydrided Metals Series, Volume 2  - "Calorimetric ComplicationsThe Examination of the Phase-II Experiment and Other Select Calorimetric Issues", Ed. M. Swartz, JET Technology Press, Wellesley Hills, MA, ISBN 1-890550-02-7 (1999) 

Swartz. M.., "Patterns of Failure in Cold Fusion Experiments", Proceedings of the 33RD Intersociety Engineering Conference on Energy Conversion, IECEC-98-I229, Colorado Springs, CO, August 2-6, (1998) 

Swartz, M., Verner, G., "The Importance of Controlling Zero-Input Electrical Power Offset", Journal of New Energy, 3, 1, 14-19 (1998) 

Swartz, M., "Thermal Conduction and Non-differential Temperature Corrections to the Enthalpic Flow Equation", Journal of New Energy, 3, 1, 10-13, (1998). 

Swartz, M., "Explanations For Some Differences Between Reports of Excess Heat in Solid State Fusion Experiments", Journal of New Energy, 2, 1, 60-65, (1997). 

Swartz, M, "Noise Measurement in cold fusion systems, Journal of New Energy, 2, 2, 56-61 (1997) 

Swartz, M, "Definitions Of Power Amplification Factor", J New Energy, 2, 54-59 (1996) 

Swartz, M.,  "Relative Impact of Thermal Stratification of the Air Surrounding a Calorimeter", Journal of New Energy, 2, 219-221 (1996) 

Swartz, M, "Improved Calculations Involving Energy Release Using a Buoyancy Transport Correction", Journal of New Energy, 1, 3, 219-221 (1996) 

Swartz, M, "Potential for Positional Variation in Flow Calorimetric Systems", Journal of New Energy, 1, 126-130 (1996) 

Swartz, M, "A  Method  To  Improve Algorithms Used To Detect Steady State Excess Enthalpy", Transactions of Fusion Technology, 26, 156-159 (1994) 

Swartz, M, "Some Lessons from Optical Examination of the PFC Phase-II Calormetric Curves", Vol. 2, "Proceedings: Fourth International Conference on Cold Fusion", 19-1, op. cit.  (1993) 

      JET Thermal Products
P.O. Box 81135
Wellesley Hills, MA   USA 02481-0001

JET	JET  Energy Prdxn	JET  Introduction to Cold Fusion	JET  Phusor	JET  Adv. Systems
JET  ICCF10 Demo	JET  10K Driver	JET  Products	JET  Analysis	JET  Testing
COLD FUSION TIMES	CFTimes  Refs	JET  Refs
CFTimes  Current Iss.	CFTimes  Index	CFTimes  Timeline	CFTimes  Skeptics	CFTimes  Books
	CFTimes News	CFTimes CF-Energy	CFTimes Science	CFTimes Search Software